Camos Jewel Camera system
CAMOS JEWEL CAMERA SYSTEMS FOR MOTORHOMES CARAVANS VANS & TRUCKS
For almost any motorhome, caravan or van with a blind spot
at the back, Camos's "Jewel" rear-view camera system is the neatest
and most effective way of getting rearward vision, both when driving forward
and when reversing.
Up until now, if you wanted to be able to see what was going
on behind your vehicle when driving normally and when reversing, the only
options were a camera with either twin lenses or a motor to change the
camera's viewing angle. Neither system is ideal: motorised cameras tend to be
expensive and can fail, while twin-lens models are either expensive or clunky
looking and of poor quality.
"Jewel" systems change views depending on whether
the vehicle is in a forward or reverse gear and yet only have one lens and no
moving parts. They're very discreet and, being made by Camos, you can be
assured that they are very well made and will last for many years. How do they
work? Ingenious software is how, and the results are amazing.
CAMERA SPEC:
Camera Type: 1.3 Mega Pixel
CMOS
Viewing Angle Drive view: 80(Horizontal)
60 (Vertical) 95 (Diagonal)
Viewing Angle Reverse view: 120(Horizontal)
90 (Vertical) 140 (Diagonal)
Min. Illumination: 0.2Lux (F=2.4)
Operating temp: -20 degrees C to 60 degrees C
Camera dimensions: 60mm width x 40mm depth x 35mm
height
Cable supplied - M: 13
Camera protection rating: IP68
MONITOR SPEC:
Monitor type: |
7" Mirror
|
5"
Digital TFT LCD |
7"
Digital TFT LCD |
Screen
specification: |
16:9
widescreen |
16:9 |
16:9 |
Monitor
dimensions - mm: |
255 x 110 x
30 |
140 x 83 x 20 |
187 x 113.5 x
26.5 |
Weight: |
1.3kg |
1.4kg |
1.6kg |