VB Full-Air Suspension 4C - Fiat Ducato, Citroen Relay, Peugeot Boxer 2006 > onwards X250 X290
VB FULL AIR SUSPENSION
SYSTEMS FOR CAMPERVANS, VANS & MOTORHOMES
·
BETTER SAFETY AND COMFORT ON THE ROAD.
·
THE BEST SOLUTION FOR SUSPENSION PROBLEMS.
VB-FullAir: full air
suspension with extensive control options
Full air suspension is an automatic,
adjustable solution to a (suspension) problem where the existing leaf or coil
spring suspension is replaced by a full air suspension system. This system
includes air springs, shock absorbers, height sensors, a compressor and an
electronic control unit (VB-ASCU).
VB-FULL AIR SUSPENSION
SYSTEMS FROM VB-AIRSUSPENSION COME WITH A REMOTE CONTROL THAT CAN BE USED TO
EASILY OPERATE VARIOUS FUNCTIONS OF THE SUSPENSION SYSTEM.
The air suspension system
filters out unevenness in the road surface, improving ride comfort. While
driving, the vehicle will constantly remain at the ride height set by VB-Air
suspension during installation. The standard ride height is determined during
the development of the air suspension and is fixed.
The ride height is the ideal
height for comfort and stability. The driveability and stability of the vehicle
are improved, which in turn increases safety. The access/loading platform
height can be raised and lowered when the vehicle is at a standstill (in some
cases with the handbrake on), allowing for easy vehicle entry/exit and for loading/unloading
goods.
DISCOVER THE VARIOUS
FULL AIR SUSPENSION SYSTEMS.
Our full air suspension systems
can be divided into three different categories:
VB-FullAir
2C rear axle: VB-FullAir 2C front axle
VB-FullAir
3C
VB-FullAir
4C
A VB-FULLAIR SYSTEM IS OFTEN
FITTED TO MEET THE FOLLOWING REQUIREMENTS:
·
INCREASED RIDE
HEIGHT
·
REDUCED OFF-CENTRE
LEVEL
·
REDUCED VEHICLE ROLL
·
IMPROVED SUSPENSION
COMFORT
·
IMPROVED DRIVING CHARACTERISTICS
·
INCREASED SAFETY
·
IMPROVED STABILITY
·
CONTROL OPTIONS
(E.G. VEHICLE CAN BE RAISED/LOWERED)
BENEFITS OF VB-FULLAIR:
·
CONTROL OPTIONS
·
CONSTANT RIDE HEIGHT
·
IMPROVED COMFORT
·
OPTIMUM ROAD HOLDING
·
INCREASED STABILITY
·
COMFORTABLE RIDE FOR
PASSENGERS
·
IMPROVED PROTECTION
FOR FRAGILE GOODS
·
LESS WEAR ON
TYRES/BRAKES
EXTENSIVE CONTROL OPTIONS.
VB-FullAir
4C
VB-FullAir 4C is a complete air
suspension system on the front and rear axle of the vehicle. 4-Corner indicates
that four height sensors are fitted: two on the front axle and two on the rear
axle.
The VB-FullAir 4C system is
supplied with remote control. You can use the remote control to easily control
all functions of the system.
VB-FULLAIR 4C - LCV
MOTORHOMES
·
AutoLevel – includes a
digital levelling function that can be used to set your vehicle level (as far
as the spring travel permits). < 30 km/h
·
Sport – lower the
level of the vehicle by around 30 mm for better handling and firm chassis
adjustment. < 0 km/h
·
Off Road – increase of
around 30 mm for greater ground clearance on rough terrain. < 30 km/h
·
Car Park – lower the vehicle to virtually the maximum
level to make it easier to get in and out. You can also use this function
(depending on the original vehicle height) to reduce the ride height in order
to enter a car park with a low roof or to drive under a gate. < 30 km/h
·
Memory function – stored height is activated.
< 0 km/h
·
Manual control to vary the loading/unloading height.
< 0 km/h
·
Ferry – the rear is raised to the maximum level,
for example to make the vehicle easy to drive onto a ferry. < 30 km/h
·
Water discharge – tilts the vehicle to the side
with the water discharge to allow the wastewater tank and the toilet tank to be
fully emptied. < 0 km/h
·
Load space – the front axle is automatically
raised, and the rear is lowered to the maximum level to make it easy to load
and unload the vehicle at the rear. < 0 km/h
The Off Road and Car Park functions let you temporarily adjust
the ride height at a maximum speed of 30 kilometres an hour. The Sport function
works at all speeds. The other functions can only be operated when the vehicle
is at a standstill.
The Ferry, Off Road and Parking functions let you temporarily
adjust the ride height at a maximum speed of 30 kilometres an hour. The other
functions can only be operated when the vehicle is at a standstill.
THE
VB-FULLAIR SETS INCLUDE:
·
Main springs*
·
Bellows
·
Height sensors
·
VB-ASCU (control unit)
·
Remote control
·
Shock absorbers (in most cases)
·
Air tank*
·
Fasteners*
·
Fitting instructions
·
User manual
·
Approval documentation
*depending on installation
OPTIONS: ALWAYS CONTINUE TO
OPERATE THE AIR SUSPENSION.
Emergency valve kit
The VB-FullAir system can be pressurised by means of
filling valves in the event of a possible electronic failure or a defect in the
compressor. The vehicle can be brought up to driving height again by means of
an external air supply so that the journey can be continued.
'Extra time' module
This module in VB-ASCU ensures that the air suspension
remains active for one hour after the ignition is switched off. The vehicle's
ignition can therefore be switched off, while all the functions of the air
suspension remain active.
Additional switch
This is an additional switch that allows the high/low
function of the air suspension to be controlled from a different location in
the vehicle, for example at the rear door. The advantage of this is that the driver
does not have to walk to the cabin to operate the air suspension.
Software version
A modified software version can be selected depending on
the application and use of the vehicle.
VB-AutoLevel
This module allows the vehicle to be positioned
horizontally, even when the vehicle is standing on uneven ground. At the push of
a button, the vehicle can be levelled quickly and smoothly. Unevenness of more
than 10 cm can be corrected (depending on the type of vehicle). Only suitable
for VB-FullAir 4C systems.
• VB-FullAir 4C is a full air suspension system for
the front or rear axle
X250 X290 chassis
Fiat Ducato, 2006 > onwards
Citroen Relay, 2006 > onwards
Peugeot Boxer, 2006 > onwards